The Model RT610Di is a high quality isolated 10 ohm
copper RTD transmitter. It completely eliminates ground loop and
other associated problems. Combined with SMD technology it provides
full input /output isolation to 1000 VDC. RT610Di series temperature
transmitters feature linearized output to temperature for 10 ohm
copper RTD’s. The wide temperature range, low cost and stocked
availability make the RT610Di an excellent choice for temperature
signal transmission.
Precision 20-turn potentiometers allow
fine adjustement for ZERO and SPAN. They are factory calibrated and
designed for highest performance and lowest cost. Standard DIN
rail-mounted package allowas for compact assembly and easy wiring in
panels.
|
 |
 |
- DIN
rail-mounted
- RTD
Copper 10 Ohm Input
- High
Quality
- Factory
Calibrated
- Isolation
to 1000 VDC
|
 |
- Output
: 4-20 mA two wire isolated
- Power
Supply : 12-36 VDC, polarity protected
- Supply
Voltage Effect : ±0.002 % / V
- Galvanic
Isolation : 1000 VDC ( AC peak ) isolation
- Open
Circuit Detection : Up scale, greater than 23 mA, limited to
40mA.
- Load
Capability : Rmax.=( Vsupply - 12V) / 20mA
- Zero
Drift : ±0.05% / °C
- Span
Drift : ±0.05% / °C
- Ambient
Operating Temperature : -40 to +70 °C ( -40 to +158°F )
- Storage
Temperature : -40 to +85 °C ( -40 to +185°F )
- Zero
and Span Adjustment : 20 turn potentiometer ± 25% for zero
and span
- Input
: Copper 10 Ohm RTD 3-wire
- Linearity
to Temperature : ±0.1% or better
- Excitation
Current :
0.2mA
| |
