The
MP200 series is a 2-wire temperature transmitter. Micro-processor
based, it was designed for flexibility, accepting mV, Pt100 and a
variety of thermocouples as the input sensor. The MP200 delivers a
scalable linear 4-20mA output current proportional to the sensor
temperature. A user-friendly configuration software is provided for
parameter setup, including sensor type, temperature range, filter,
etc.
|
 |
 |
- Linearized
Output To Temperature
- High
Quality
- Cold
Junction Compensation for Thermocouples
- Factory
Calibrated
- Proctection
against polarity
inversion
|
 |
- Sensor
input : User defined. The supported sensors are liste in
table 1, along with their maximum ranges.
- Thermocouples
: Types J, K, R, S, T, N, E , according to IEC 60584 (
ITS-90 ). Impedance >> 1M½
- Pt100
: xcitation : 180 uA. 2 or 3-wire connection (for 2-wire
sensors, tie terminals 2 and 3 together). a = 0.00385,
according to IEC 60751( ITS-90 ).
- Voltage
: 0 a 50mVdc. Impedance >> 1M½
- Total
accuracy : better than 0,3% of the maximum range for
thermocouples and 0,2% for Pt100 and voltage;
- Response
Time : < 100 ms;
- Output
: 2-wire 4-20mA, linear with respect to the measured
temperature.
- Resolution:
0,004mA ( 12 bits ).
- Power
supply : 12 to 35Vdc, across the transmitter;
- Maximum
load (RL) : RL ( max. )= (V supply – 12) / 0,02 [½]
- Operating
Temperature : -40 to 85°C
- Humidity
: 0 a 90% RH
- Electromagnetic
compatibility : EN 50081-2, EN
50082-2
| |
