The
MIST is a RTD sensor build with a transmitter hermetically sealed in
a stainless steel adapter only 2 inches long, with a highly stable
and accurate 4-20mA output.
The MIST comes factory
calibrated, which eliminates the need of costly field calibrations
and if the customer ordered the MIST with the wrong temperature
range or if the application changes, it can be re-calibrated and
re-scaled to any temperature range within the sensor's limit using a
unique computer interface module. No calibration using temperature
baths is necessary.
Since the transmitter is integrated to
the sensor and hermetically sealed, it prevents water and humidity
to infiltrate the housing and damage the electronics. There are no
additional connection leads or hardware, such as mounting boxes or
cables tracks, necessary. Installation time and therefore labor
costs, is considerately reduced.
|
 |
 |
- Microprocessor
based Integrated Sensor Transmitter (MIST)
- RTD
sensor outputs linearized 4-20 mA signal
- Re-calibrate
remotely with computer interface module and software
- Low
cost and easy installation
- Compact
size and hermitically
sealed
|
 |
- High
temperature -200c to 600c
- Power
supply 12-36 VDC, polarity protected
- Max
Pressure 100bar (1500 PSIG)
- Electrical
protection NEMA 6P
- Accuracy:
(0.25c + 0.40% of reading) largest error, normally
less
| |
