DTG11
Digital Temperature probe

DTG11

Description
Model DTG11 Digital Temperature Gauge is a complete solution for most industrial temperature monitoring and temperature indicating applications. This gauge features a bright and large 4-digit red LED display, optional analog 4-20 mA output, optional switch output, and an optional RTD output. Utilizing Intempco’s patented MIST technology and the self-calibration feature, DTG11 is designed for optimum accuracy and performance. The DTG11 is designed as a direct replacement for Bi-Metal, Liquid Bulb and Glass Thermometers.

DTG11 can be factory calibrated to customer specified temperature range, in units of oC or oF. But the unique feature of the DTG11 is that it is field programmable. Process temperature change ? No problem ! Simply use DTG-MIST interface module and re-range your DTG11 without the need to recalibrate or loss of accuracy. It is much more accurate than an RTD and a separate indicator/transmitter. When the DTG11 is re-scaled to a different temperature range, the calibrated default values are not lost. This gage can be customer re-calibrated by performing one-point or two-point calibration using known temperature standards. This is where the DTG11 leaves competition behind. Indicating temperature range, current output, switch set point, switching hysterises, switch logic, damping and other features all programmable.

The DTG11 wetted parts, as well as the housing, are fabricated from stainless 316. The probe is either of 1/4” or 3/8” diameter as standard. As an option, other diameters and materials are available. The electrical connector, a Micro-DC male plug, can also be made available from stainless housing. The RTD element used is Pt-100 standard accuracy to IEC751 Class B. This thermometer can be made available with an additional 3-wire RTD output. This feature allows a single process connection to be used for indication of temperature and for remote indication, recording, or controlling. Each DTG11 has the part number, range and serial number marked on the transmitter housing.

If you require an accurate, stable and dependable digital thermometer, look no further. Model DTG11 is your solution.


  1. Large 4-digit red LED display
  2. Customer programmable via Intempco’s DTG-MIST module andsoftware
  3. Fully programmable 4-20mA output corresponding to temperature range
  4. Optional fully programmable switch output, relay or transistor
  5. Utilizes self-calibration feature for accurate and stable performance
  6. Utilizes Pt-100 RTD element for temperature sensing
  7. All stainless 316 construction
  8. Connector Brad Harrison® or equivalent Micro-DC male plug
  9. IP 65 / NEMA 4X

  1. Replacement for Bi-Metal, Liquid Bulb and Gas
  2. Thermometers
  3. Pharmaceutical
  4. Food preparation
  5. Utilities and Municipal
  6. Refineries
  7. Chemical and Petrochemical Plants
  8. Paper mills
  9. Hydraulic