INTEMPCO LTX02 series 2-wire level transmitters are
esentially LTX01 transmitters assembled with--a concetric tube. As
such LTX02 sensors can measure tank levels of liquids in metalic as
well as non-metalic tanks. All other performance specifications are
indentical to LTX01 sensors.
Level measurement of water based
liquids in non-metalic tanks, using a teflon coated probe is an
ideal application for the LTX02. To obtain a -linear output in an
irregularly shaped tank, such as a cone, use a concentric tube
LTX02. For oils and mineral based liquids in non-metalic and metalic
tanks use LTX02 with a bare SS316 probe. Make sure that the liquids
are compatible with SS316 and PFA Teflon materials.
The LTX02
includes a standard 4 - 20mA loop powered LTX transmitter,a rugged
customer selected enclosure, a rigid bare SS316 or Teflon coated
probe, concentric tube for ranges of up to 20 feet and a fitting.
The LTX02 is designed for tanks which have fitting connections of
3/4 ” NPT or larger. Call factory for smaller tank openings or
special applications.
|
 |
 |
- Continuous
loop powered 4-20 mA operation
- Microprocessor
Based
- Accuracy
1% of span for constant dielectric of material
- Non-interactive
zero and span calibration
- Calibration
accomplished with 4 push buttons
- Heavy
duty industrial design
- NEMA
rated aluminum, stainless, PVC and explosion proof housings
available
- Standard
fitting 1-1/2 NPT, flange and special fittings available
- SS316
outside tube
- Choice
of bare SS316 or Teflon coated
probe
|
 |
- Water
and water-based liquids in non-metalic tanks
- Jacketed
probes required for conductive media
- Organic
Acids compatible with SS316
- Oils
and fuels in metalic and non-metalic tanks
- Use
bare probes with non-conductive media
- On-site
calibration required
- Not
recommended where material dielectric
changes
| |
